Back

How To Fit: 2G Click Luxury Vinyl Tiles

Share

The 2G click system is one of the easiest ways to fit Luxury Vinyl Tiles (LVT), making it a great option for DIY projects. In our Pronto range, you’ll find both 2G and 5Gi click systems, and while they look similar, the method of fitting them is slightly different. This guide will walk you through the 2G click fitting method.


Before you get started, make sure your flooring is ready for the room where it will be fitted. Leave the unopened packs stacked flat for at least 48 hours, with space around them for air to circulate. This acclimatisation stage allows the flooring to adjust to the room's conditions before installation begins.


Another benefit of our Pronto 2G flooring is that every plank comes with integrated underlay, so there's no need to buy or fit a separate layer. In fact, adding extra underlay can create too much movement beneath the boards and affect the performance of the click system.


For more advice on getting the base ready, our How to Prepare a Substrate for LVT Flooring guide covers the checks to make before installation begins.


How To Check Which Click System You Have

To make sure you’re following the correct instructions, check the product page for your chosen flooring on our website or the label on the box, where the click system is listed.


It's important to get this right because 2G and 5Gi use different fitting methods. If your Pronto LVT flooring has the 5Gi click system, check out our How to Fit 5Gi Click LVT guide.

Before You Start Fitting 2G LVT
Check Your Substrate

Make sure the substrate is clean, dry, stable and suitably level before fitting begins. Any dips, raised areas or movement in the base should be dealt with first, as they can leave the flooring unsupported and put unnecessary stress on the click joints. 


Remember that our Pronto 2G LVT flooring already comes with integrated underlay, so there's no need to add another layer underneath.

Leave The Correct Expansion Gaps
Before getting started, make sure you leave an expansion gap around the edge of the room. 

For most installations, this should be 6mm, but if the floor is being fitted over underfloor heating, increase the gap to 10mm. This space allows the flooring to expand and contract naturally as temperatures change, and spacer wedges are the easiest way to keep the gap consistent as you work. 

Plan Around Fixed Furniture


Heavy, large and permanently fixed furniture, such as kitchen islands and fitted wardrobes, can stop the floor from expanding, so it shouldn’t be placed on top of Pronto LVT. Instead, you must plan to fit your flooring around these items, leaving the required expansion gap between the LVT and the furniture. If you’re having a new kitchen island or fitted wardrobe installed, make sure you’ve planned where it’s going before you lay the floor.
Fitting 2G Click LVT

This fitting technique is suitable for the following Pronto LVT ranges:


Wykeham Grey | Rivington Brown | Rosenholm Grey | Ingleton Brown | Krahn Brown | Galloway Grey | Glenmore Grey | Brighstone Grey | Gimrock Grey | Winspit Grey | Stanhope Grey | Ennerdale Brown | Epping Brown | Haldon Brown | Arden Grey


The following instructions are specifically for Pronto flooring with a 2G click system. Always check your product page or packaging to make sure you're using the correct fitting method.


As with any LVT fitting, you may notice slight variation in the appearance of individual planks. For the most even and natural finish, open several packs at a time and mix the planks as you lay them so the pattern and colour are well balanced across the whole floor.

Step One: Lay The First Row

Place the first plank in the corner of the room and using suitable LVT spacers, keep a consistent 6mm expansion gap between both the length and width of the plank and the wall. To fit the next plank, angle the short edge into the first plank and lower it until it clicks into place.


Continue in the same way until the first row is complete.

Step Two: Begin The Next Row
Start the second row with an offcut from the end of the first row where possible, so the joints are staggered. The offcut should be at least 30cm long for a tile, or 40cm for a plank. Angle the long edge of the new piece into the row before it, push it into the open seam and then drop lock it down into place, locking them together.
Step Three: Connect The Rows

To complete the second row, lift the front edge of the previous plank by approximately 1-2cm. This creates the angle needed to slot the short edge of the new plank into the seam and click together. Gently tap the plank to align the long edges, lower both planks flat, ensuring the long edges are sat in the seams of the previous row, so they lock into place.

Step Four: Complete The Rows

Continue these steps on all other rows until the flooring is complete.

If you're still unsure about how the boards connect, our Pronto 2G fitting video shows the installation process in action, so you can see how the click system works before trying it yourself.
Finishing Your Floor With Door Bars and Scotias

Once the flooring is fitted, you'll need to cover the expansion gaps and finish any transitions between rooms.


Scotias are used to cover the expansion gap along the skirting, giving the floor a neat finish while allowing the boards to move underneath. They should always be secured to the wall or skirting, never directly to the LVT itself. The same principle applies around permanently fixed furniture. Make sure the required movement gap is maintained and that any finishing materials don't restrict the flooring. Install door bars where rooms meet to hide exposed edges, give a clean join, and help protect the floor from wear.



We stock a range of door bars and scotias in different finishes to help you find something that works with your chosen flooring.

This guide is specifically for Pronto flooring with a 2G click system, so if you've chosen another product from our LVT collection, make sure you're following the correct instructions. You'll find all the relevant instructions in our flooring fitting guides, or you can explore our full LVT flooring collection if you're still deciding on the right floor for your home.

Knowledge BaseFlooringFitting GuidesHow To Fit: 2G Click Luxury Vinyl Tiles