Herringbone LVT Flooring

Herringbone's a laying pattern, which consists of small panels set in a repeating zig-zag rather than running straight across the room the way plank does. We stock it in a few different LVT ranges, and the click system actually depends on which one you've gone for.  Whatever range it is though, every pack comes split into two panel types, A for right-hand, B for left-hand, and they click together in sequence to build the pattern, something plank doesn't need since it's just laid in a simple run.

It depends on the room, not the range. Laid horizontally, herringbone LVT tends to widen a narrow room, since the pattern draws the eye out to the sides. Laid vertically, it has more of a lengthening effect, drawing the eye upward instead. It's worth dry-laying a small section first to see which direction suits your space.

This varies by range. SPC herringbone can be fitted continuously up to 15m in any direction, or a total area of 15m x 15m, before you'll need a transition joint. Real wood veneer herringbone has a slightly smaller limit, 12m in any direction, or 12m x 12m in total.

No, all of our herringbone LVT ranges come with integrated underlay already built into the panel, so there's no need to add anything else underneath.

Regular vacuuming or sweeping keeps grit and dust from scratching the surface, and a damp cloth handles spills, wiped up as soon as you notice them. Steam mops should be avoided on herringbone LVT, since the heat and moisture can affect the finish over time.  For the full routine, including recommended products and stain removal, see our guide to cleaning and caring for LVT flooring.

There is more to it than fitting plank, but it's still a manageable DIY job if you take your time. The A and B panels need to be kept separate and fitted in the correct sequence to build the pattern properly, so it's worth reading through our full fitting guides before you start.