Which tiles would you recommend for use in high limescale areas?

Limescale build-up is most often found in hard water areas, limescale build up occurs when this type of water evaporates from a surface (particularly in higher temperatures), leaving behind a layer of minerals in the affected areas.

The longer this layer of mineral debris is left on surfaces the harder it becomes to remove.  It’s important to prevent the build-up and try to remove the layer as soon as you see it starting to settle.

We would recommend opting for a glossy and smooth finished tile in hard water areas as these are harder for the limescale to build-up on. The glossy finish will also make the tiles easier to wipe clean, thus preventing future build-up.

It is best to avoid tiles which are very porous, such as natural stone (travertine, limestone and marble). These materials allow the minerals from within the hard water more places to settle and stain.

It is recommended to clean your tiles more regularly using a PH Neutral cleaner such as BAL Micro-shield-Plus to help prevent the build-up of limescale.

Sometimes your tiles, taps or glass shower doors may require a deeper clean. The best and most effective way to remove the build-up of watermarks and limescale is the use of white distilled vinegar and water. Avoid using malt or cider vinegar as these won’t clean as thoroughly and coloured vinegars could stain your surfaces.

Simply mix equal parts water and white vinegar together, pour the mixture into a spray bottle and shake thoroughly. Spray the affected areas with the mixture and leave for a few moments, use a cotton cloth to completely wipe the area clean. If any stubborn stains won’t come off, pour the mixture onto a cloth and scrub.

Once finished, and all the limescale residue has been removed, use a PH Neutral cleaner and polish your surface using a microfibre cloth for best results.