Wet Hemp Grey (25x40cm) Tile

Wet is the latest collection from Hemingway Design. Stunning ceramic wall tiles designed to make your home look great. The tiles are in the same large scale designs that are a signature Hemingway look & are very versatile, lending themselves to use in almost any room in the house.

View our refund and returns policy »

Please note that this is a discontinued line with low quantities. We may have to consolidate stock from several stores which could mean the following:

• We may not be able to guarantee continuity between batches
• Orders may take longer than the advertised delivery timescales
• Sample orders may take longer than the advertised delivery timescales
• In a small number of cases we may be unable to fulfil your order, in this case we will contact you
• For more information please contact your local store or call Online Support on 0800 783 6262

Most textured tiles will not require sealing, however due to the nature of the textured surface they are prone to retaining grout in the crevices on the front making grout cleaning more difficult. If the grout is not cleaned off correctly, the tile will look like it has been stained and have a grout residue left on.

PREPARE: Before grouting you should apply BAL Protective Sealer, in some cases 2 coats will make grout cleaning an easier process by stopping the grout sticking to the tile. It should be applied with a clean colour fast lint free cloth. The first coat should be left to dry for at least 15 minutes. The second coat must be left a minimum of 1 hour to dry.

GROUTING: Grouting should be carried out using a hard grout float as it is less likely to fill all the voids of the tile with grout.If using a rapid set grout so not allow the grout to sit on the tile for longer than 15 minutes.

CLEAN: After grouting a grout clean up pad should be used to remove any excess from the tile. Once dry the tile should be buffed to remove any final residue. (Grout should not be left in contact with a tile for more than 15 minutes). To remove protective sealer the tile will need to be cleaned at least twice using Tile and Stone Cleaner diluted. This can also be used to maintain the tile for ongoing cleaning requirements.

Acidic or highly Alkaline cleaners are not recommended for maintenance of this tile as they will damage the life of the sealer.

---

Ceramic tiles will generally not require sealing (unless stated by the manufacturer). It is essential that the correct products are used for both the initial clean after fitting and to maintain them throughout their life.

PREPARE: For an initial clean, use diluted residue remover for honed and polished stone. Allow the residue remover to sit on the tile at least 10 minutes to allow the grout residue to be broken down. The use of an emulsifying pad will aid with removal of grout residue. Sometimes, particularly on a textured surface, after using residue removers there is still some residue which may be due to the polymer within the grout. This needs to be softened with an alkaline detergent. Use Tile and Stone Stain Remover in the same way as the residue remover.

CLEAN: To prevent the build up of deposits it is important that the correct cleaner is used, to maintain the tiles we suggest Tile & Stone Cleaner diluted.

Acidic or highly Alkaline cleaners are not recommended for maintenance of this tile as they will damage the life of the sealer .

---