The Atlas range is the perfect ceramic skirting to finish off your room and is available in all colours. Use the Atlas stop end to ensure a flawless finish on any external corners. Please note this tile requires sealing.

Each box contains 4 tiles.

View our refund and returns policy »

Craquele glazed tiles require sealing as they are porous. Care should be taken when using some grouts as they could scratch soft glazed tiles. It is likely that grout will cover the cracks in the tile, this should be removed where possible before the tile is sealed.

PREPARE: After grouting for an initial clean, use diluted residue remover for honed and polished stone. Allow the residue remover to sit on the tile at least 10 minutes to allow the grout residue to be broken down. The use of an emulsifying pad will aid with removal of grout residue. Sometimes, particularly on a textured surface, after using residue removers there is still some residue which may be due to the polymer within the grout. This needs to be softened with an alkaline detergent. Use Tile and Stone Stain Remover in the same way as the residue remover.

PROTECT: Use a polished protector, 2 coats are required. Apply with either a brush or a roller and allow each coat to dry thoroughly.

CLEAN: To prevent the build up of deposits it is important that the correct cleaner is used, to maintain the tiles we suggest Tile & Stone Cleaner diluted.

Acidic or highly Alkaline cleaners are not recommended for maintenance of this tile as they will damage the life of the sealer .

Ceramic tiles will generally not require sealing (unless stated by the manufacturer). It is essential that the correct products are used for both the initial clean after fitting and to maintain them throughout their life.

PREPARE: For an initial clean, use diluted residue remover for honed and polished stone. Allow the residue remover to sit on the tile at least 10 minutes to allow the grout residue to be broken down. The use of an emulsifying pad will aid with removal of grout residue. Sometimes, particularly on a textured surface, after using residue removers there is still some residue which may be due to the polymer within the grout. This needs to be softened with an alkaline detergent. Use Tile and Stone Stain Remover in the same way as the residue remover.

CLEAN: To prevent the build up of deposits it is important that the correct cleaner is used, to maintain the tiles we suggest Tile & Stone Cleaner diluted.

Acidic or highly Alkaline cleaners are not recommended for maintenance of this tile as they will damage the life of the sealer .

» Please note this tile requires protecting to keep it in top condition. We’ll add the correct products to your basket during the checkout but please find a guide to coverage requirements here.