Product code | 040015 |
Tiles per box | 50 |
Product size | 10cm x 10cm x 1cm |
Colour | Beige |
Material | Natural Stone, Travertine |
Travertine, a derivative of Limestone, is a beautifully formed sedimentary rock.
The natural pits and voids that feature on its surface give each tile a unique identity, while its warm, earthy tones will add a touch of glamour to any home.
Please note this product is a natural stone and therefore you will find colour and pattern variations in the tiles due to the way the product is made. We recommend laying out your tiles before fixing to ensure you get a good mix of shades across the area. For very large areas please ask our experts in store for further advice.
View our refund and returns policy »
Please note that this is a discontinued line with low quantities. We may have to consolidate stock from several stores which could mean the following:
Travertine and Marble are very soft stones and should be maintained using PH neutral products as acid and alkaline will damage the stone and reduce the effectiveness of any sealers that have been used on the stone.
PREPARE: Diluted First Wash 1:30 covers 50m2. Allow the solution to sit on the tile for 5 minutes and work residue off with a suitable pad or cloth. Rinse thoroughly with clean water. Sometimes after using a First Wash, residues may be left behind, this may be due to the polymer within the grout. In these instances use Tile and Stone Stain Remover diluted 1:5 in the same way as the First Wash.
PROTECT: If using Polished Protector, for polished travertine, apply 1 coat using a brush or a roller. A 1ltr bottle will cover approx. 30m2. If using Unpolished Protector, for unpolished travertine, apply 2 coats using a brush or a roller. Apply the second coat within 4 hours of the first coat. A 1ltr bottle will cover approx 30m2.
CLEAN: To prevent the build up of deposits it is important that the correct cleaner is used, to maintain the tiles we suggest Tile & Stone Cleaner diluted 1:200. Using the correct cleaning product ensures the life span of the protection
ENHANCE: Unpolished travertine can be enhanced using Colour Intensifier. After using First Wash and when the travertine is dry, apply 2 coats of Colour Intensifier.
PLEASE NOTE: Acidic or Alkaline cleaners are not recommended for use on travertine. Travertine does not require pre-sealing. Contrasting grouts can cause staining, so it is advised to test the grout on a small area before grouting commences.
X
=
0m2X
=
0m2X
=
0m2X
=
0m2A basic grout suitable for tiling Ceramic, Marble, Travertine and Limestone tiles onto indoor and outdoor walls. Can be used in some wet areas.
For more details and information, view our BAL Grout chart here.A premium grout suitable for use with most tile types on both walls and floors. Can be used indoors and outdoors as well as in wet areas.
For more details and information, view our BAL Grout chart here.A specialist grout suitable for both walls and floors, inside and outside. Can be used with Ceramic, Porcelain and Glass tiles in both wet and dry areas.
For more details and information, view our BAL Grout chart here.A quality grout suitable for use with most tile types on indoor and outdoor walls. Can also be used in wet areas.
For more details and information, view our BAL Grout chart here.A quality grout suitable for use with most tile types on indoor and outdoor walls. Can also be used in wet areas.
For more details and information, view our BAL Grout chart here.A good grout suitable for use with most tile types on both indoor and outdoor walls. Can be used in wet areas.
For more details and information, view our BAL Grout chart here.A good grout suitable for use with most tile types except Glass on both indoor and outdoor floors. Can be used in some wet areas.
For more details and information, view our BAL Grout chart here.
A basic grout suitable for tiling Ceramic, Marble, Travertine and Limestone tiles onto indoor and outdoor floors. Can be used in some wet areas.
For more details and information, view our BAL Grout chart here.
A super-fine grout specifically formulated and modified for tiles with joint widths of up to 20mm, for most tile types and applications, including dry and wet conditions.
Professional grade ready mix grout. Easy to use and apply, with the ability to grout joints from 2-10mm.