|Product size||30cm x 60cm|
The new Regal® rock is a perfect addition to any area of your home. Suitable for both walls and floors, the textured finish creates a dynamic look, but the improved smoother surface means comfort still comes first.
This extension to the bestselling Regal® range offers porcelain in the look of stone, in two sizes and four colours.
Exclusive to Topps Tiles.
Please note: These tiles have an anti-slip rating of R11.
|Suitable rooms:||Bathroom, Study, Bedroom, Hallway, Living Room, Kitchen, Conservatory|
|Suitable surface:||Wall, Floor|
|Anti-Slip Rating :||R11|
|Delivery options:||Home or Store|
Most textured tiles will not require sealing, however due to the nature of the textured surface they are prone to retaining grout in the crevices on the front making grout cleaning more difficult. If the grout is not cleaned off correctly, the tile will look like it has been stained and have a grout residue left on.
PREPARE: Before grouting you should apply BAL Protective Sealer, in some cases 2 coats will make grout cleaning an easier process by stopping the grout sticking to the tile. It should be applied with a clean colour fast lint free cloth. The first coat should be left to dry for at least 15 minutes. The second coat must be left a minimum of 1 hour to dry.
GROUTING: Grouting should be carried out using a hard grout float as it is less likely to fill all the voids of the tile with grout.If using a rapid set grout so not allow the grout to sit on the tile for longer than 15 minutes.
CLEAN: After grouting a grout clean up pad should be used to remove any excess from the tile. Once dry the tile should be buffed to remove any final residue. (Grout should not be left in contact with a tile for more than 15 minutes). To remove protective sealer and any left over grout haze, the tile will need to be cleaned at least twice using Tile and Stone Cleanerdiluted. This can also be used to maintain the tile for ongoing cleaning requirements.
Acidic or highly Alkaline cleaners are not recommended for maintenance of this tile as they will damage the life of the sealer.
Porcelain in its natural form is textured in order for it to have a polished finish the tile needs to be grinded down and then buffed to a highly polished finish, this creates micro pours that will require sealing. All Polished Porcelain tiles sold by Topps Tiles are micro sealed at the factory unless otherwise stated on the box. This sealer will last approximately 12 months providing the correct cleaners are used. In most cases polished porcelain will also have a transit wax on to prevent damage during transportation, this will need to be removed with a Stone Stripper before grouting.
PREPARE: After grouting for an initial clean, use diluted residue remover for honed and polished stone. Allow the residue remover to sit on the tile at least 10 minutes to allow the grout residue to be broken down. The use of an emulsifying pad will aid with removal of grout residue.
PROTECT: After the factory applied micro sealer has worn off you will need to reseal polished porcelain tiles. 2 coats of Polished Protector are required, apply with either a brush or a roler, allow each coat to dry thoroughly.
CLEAN: To prevent the build up of deposits it is important that the correct cleaner is used, to maintain the tiles we suggest Tile & Stone Cleaner diluted.
Acidic or highly Alkaline cleaners are not recommended for maintenance of this tile as they will damage the life of the sealer .